Full-view glass
Raised-panel steel
Carriage house
Modern flush
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Melrose?
Garage door repair in Melrose typically runs $150 – $600, depending on whether the job is a single failed part or a full opener and hardware overhaul. Spring repair is the most common call we get and usually lands between $180 – $340 for one spring, while a brand-new door installation runs $700 – $2200. Every number on this page is an estimate for the Melrose market in 2026; the written estimate we give you on site is the price that stands.
Key Takeaways
- A standard garage door repair in Melrose is typically $150 – $600.
- Replacing one spring is $180 – $340; a matched pair is double, since both go at once.
- Opener repair is $120 – $320; a new opener installed is $250 – $550.
- A single damaged panel runs $250 – $500, and a full new door is $700 – $2200.
- Estimates are free, and we work on all eight major door and opener brands.
Garage Door Cost Breakdown (2026)
Here is what the common jobs cost in Melrose. These are typical estimated ranges, not a fixed menu. The exact figure depends on your door, your opener and what we find once we’re looking at it.
| Service | Typical estimated cost in Melrose |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation (new opener) | $250 – $550 |
| Panel replacement (per panel) | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement (full set) | $110 – $220 |
| New door installation | $700 – $2200 |
One thing to be clear about up front: the spring number is for a single spring. Most residential doors use a pair of springs, and when one breaks the other is almost always close behind. We replace matched pairs together, so a pair typically costs about twice the single-spring range. You’ll see both options in your written estimate and you can decide which way you want to go.
What pushes a job toward the top of a range? Door size and weight, whether the door is a basic steel panel or a heavier insulated carriage style, and how much of the hardware needs to come off before we can get to the failed part. A simple roller swap sits near the bottom. A snapped spring on a double-wide door with a bent track after it sits near the top. If you want a closer read on where your door falls, our garage door repair Soundview team can walk you through it on the phone before you commit to anything.
What Affects Garage Door Pricing in Melrose
Melrose doors do the same jobs every door in the area does, but a handful of local realities show up in the price. Here are the factors that move the estimate most.
- Door type and weight. A single-car steel door and a double-car insulated wood-composite door are different jobs even for the same repair. Heavier doors need heavier springs, heavier tracks and sometimes a stronger opener, and the parts cost more. When we quote, we match the part to the door, not to a generic spec.
- Seasonal shifts and temperature swings. Cold snaps and warm spells both put stress on springs, cables and the door’s balance. Doors that were working fine in milder weather start dragging or popping once the temperature drops, and that’s when a lot of Melrose calls come in. A door that’s struggling with the seasons is worth checking before a spring lets go.
- Brand and parts availability. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. When your door or opener is one of those eight, we already know the parts and the quirks. If it’s an older or oddball model, tracking down the right part can take longer and add to the range.
- Age of the hardware. If your rollers, hinges and cables are all original and one spring finally snaps, you’re often better off replacing the whole set in one visit than paying for three separate trips over the next year. We’ll show you both options.
- Whether the door needs repair or replacement. A single dented panel is a panel job ($250 – $500). A door that’s rusted through, off its tracks in three places, or built on a frame that’s bowed is a different conversation, and sometimes a new door at $700 – $2200 is the smarter spend over a decade of patching.
- Opener age and type. Belt drives, chain drives and screw drives all age differently. A simple logic board or safety sensor fix lands at the low end of opener repair ($120 – $320). A full replacement with a new opener runs $250 – $550, and that’s often the better value once the unit is over a certain age.
Spring Repair and the Safety Question
Garage door springs and cables are under high tension, and they’re the part of the trade where a DIY attempt can and does put people in the hospital. A garage door spring repair is not a job to tackle with a ladder and a couple of wrenches from the hardware store. The torsion spring over the door and the extension springs above the tracks store enough force to break a wrist or worse if they’re released the wrong way. When a spring lets go, it’s loud, and it can send cable fragments across the garage. If you hear that snap or see a broken spring, leave the door down and call us. Our technicians work these jobs constantly and handle the tension safely. You’ll find more on the process on our garage door spring repair page. And if the door is stuck open and you can’t close it, that’s an emergency call, not a wait-until-next-week call.
Cable Repair, Track Realignment and Rollers
Cables run from the bottom corners of the door up to the drums, and when one frays or snaps, the door hangs crooked and won’t close evenly. Cable repair runs $130 – $250 in Melrose. Track realignment ($120 – $240) is usually the result of an impact: something hit the door, a wheel came out of the track, or the door went up crooked and knocked a track out of plumb. A full roller replacement is $110 – $220 and is often the quietest fix you’ll ever make to your door. Worn steel rollers rattle and grind; fresh nylon rollers quiet the whole house down. If your door has been getting louder over the years, that’s usually the reason. You can read more on our garage door repair page.
Opener Repair vs. Opener Installation
An opener that won’t respond, reverses on the way down, or runs without moving the door is an opener repair job ($120 – $320). That covers sensors, logic boards, gears, and the drive mechanism itself. If the opener is old, the parts are discontinued, or you’re upgrading anyway, a new opener installed runs $250 – $550. LiftMaster and Genie are the most common brands we see in Melrose garages, and Chamberlain and Craftsman are close behind. We work on all of them and carry the knowledge that comes from working the same brands over and over. If you’re not sure whether to fix or replace, our garage door opener repair team can usually tell from a photo and a short conversation.
New Door Installation: What $700 – $2200 Covers
A new door installation in Melrose runs $700 – $2200 depending on size, material and insulation. That range covers the door itself, the hardware and the install. Single-car basic steel doors sit at the low end. Insulated double-car doors in a carriage-house style sit at the high end. If you’re replacing the opener at the same time, factor in $250 – $550 for the opener. Clopay, Amarr, Wayne Dalton and Raynor are the brands we install most, and we can walk you through the trade-offs between them: insulation, weight, window options and how each one holds up in a closed, unheated garage. For a fuller look at the process, see our garage door installation page.
How to Save on Garage Door Service in Melrose
A few practical ways to stay at the low end of the range without cutting corners:
- Get the whole spring pair replaced at once. Replacing one spring of a matched pair leaves you paying for a second visit when the other lets go in a few months. A pair costs about twice a single, but it saves you a second trip charge.
- Catch the noise early. Grinding rollers, a door that hesitates before it moves, or a shutter when it opens usually means a cheap fix is available. Waiting until the cable snaps turns a $110 – $220 roller job into a $130 – $250 cable job plus a bent track.
- Ask about a tune-up before the cold season. The fall is when a lot of Melrose springs give out. A check before the temperature drops can catch a tired spring before it snaps in a cold snap on a Sunday night.
- Repair, don’t replace, when the door is sound. Panels run $250 – $500; a whole door is $700 – $2200. If the frame and the panels are solid and the door just needs a new opener and fresh rollers, that’s the smarter spend.
- Ask us directly. Estimates are free, and we’ll tell you honestly if a repair isn’t worth the money. Call (866) 690-8121 for a free estimate.
Why Melrose Homeowners Call a Garage Door Specialist
Garage doors are all we do. Every technician on the job works on garage doors exclusively, not on plumbing, HVAC or electrical calls between door jobs. Our technicians have up to 12 years of experience, and they work on the eight major brands we’ve listed throughout this page. When the door won’t open at night or a spring snaps on a Sunday, we’re set up for it. Emergency garage door service is a core part of what we offer, not an upsell. Spring repair, cable repair, opener work and full new installation sit under the same roof, so you don’t need to find a second company halfway through the job. If you’re in Melrose and you’d rather talk to a specialist than a general handyman, that’s what we’re here for.
FAQs – Garage Door Cost in Melrose
How much does a garage door repair cost in Melrose?
A typical garage door repair in Melrose runs $150 – $600. The low end covers a single roller or sensor fix; the high end covers multi-part jobs like a spring snap plus a bent track. Call (866) 690-8121 for an exact quote on your door – estimates are free.
How much does a garage door spring cost in Melrose?
One spring is $180 – $340 in Melrose. Because springs work in matched pairs and both are usually replaced together, a full pair typically costs about twice that range. We always show you both options in the written estimate before any work starts. Call (866) 690-8121 to book a spring check.
Can you come today?
For emergency calls, yes. We offer same-day emergency garage door service in Melrose for doors that won’t open or close, springs that have snapped, or cables that have let go. Standard repairs are booked as quickly as we can schedule them. Call (866) 690-8121 and tell us what’s happening with your door.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper than replacement when the panels and frame are solid. Panel repair runs $250 – $500; a full door is $700 – $2200. Replacement makes more sense when the frame is bowed, multiple panels are damaged, or the door is past its useful life. Call (866) 690-8121 and we’ll tell you honestly which way we’d go.
How much does a new garage door opener cost installed in Melrose?
Opener installation runs $250 – $550 in Melrose, depending on the drive type and the features you want. Opener repair, if the unit is fixable, is $120 – $320. We work on LiftMaster, Chamberlain, Genie, Craftsman and the other major brands. Call (866) 690-8121 for a free estimate.
Do you work on my brand of garage door?
Almost certainly. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, which covers the vast majority of doors and openers in Melrose garages. Call (866) 690-8121 and tell us the brand and model if you know it.
Talk to Us About Your Door
If your garage door is broken, stuck, noisy or due for a new opener, we’d like to hear from you. We work on residential doors in Melrose, and estimates are free. When the door won’t open and you can’t wait, that’s what we’re here for. Call (866) 690-8121 to talk through what’s going on and get a free estimate. Remember: if you see or hear a broken spring, leave the door alone and call us – that’s a job for a trained technician, not a weekend project.
Pricing reflects the Melrose market as of 2026. Garage Door Repair Soundview offers free estimates – call (866) 690-8121.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Neil Anderson"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Reggie Bryant"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Megan Miller